How much does it cost to install Electric Heating in the UK? The installation cost of connected electric radiators can vary based on several factors, you can find everything you need to know listed below.
Electric heating installers cost, when calculating the total cost of a Electric central heating, consider the price of the number of electric radiators, heating management controls, and removal and disposal of the old system. Each component, the size of your home and the number of rooms require careful consideration before installation to ensure optimal performance and to keep running costs manageable. The cost also depends on the size of your home, the range you require, and the installer’s charge
Electrical wiring adaptation
If your property existing electrics wiring and the primary electrical distribution board consumer unit* need adjustments to accommodate the new heating system (e.g., adding a dedicated 240V RCD circuit), installation costs may increase. Most of our products are suitable for existing electrical wiring, DIY fittings come with all of the fixtures and fittings you need to get set up so all you’ll need to provide is the necessary few tools: spirit level, screw drivers, electric drill. Installation price assumes existing circuits & fittings test OK for safety and comply with BS7671 as already installed, this do not include the minor works or electrical certification of the existing circuits.
*An electrical board receives the mains electrical supply and safely splits this into smaller supplies that feed various parts of an electrical system.
Site Conditions: Favourable site conditions (easy access, straightforward installation) may result in lower labour costs, complex installations (tight spaces, difficult wiring) can increase raise the overall cost.
Labor Charges
Basic labour includes removal of the old heaters and mounting the new radiators, connecting it to the existing electrical circuit’s fuse spurs and ensuring proper temperature control. The contractor’s overheads and commissioning are likely to add to the total cost, with figures between £400 up to £600 for a 2 bedrooms house, between £600 up to £800 for a 4 bedrooms house, £1500 up to £1900 for a commercial, offices promises.
Materials and Supplies: Fittings, fasteners and mounting hardware are part of the installation and should be included in the cost, remember that each heating project is unique, and actual costs will depend on specific circumstances. If you’re planning an electric wall heater installation, it’s best to consult professionals electrician for accurate assessments when obtaining quotes.
Planning your new electric heating
Firstly, we need to determine the reasons for replacing an existing inefficient heating system. Often, it’s due to shortfalls in energy efficiency, controllability and effective heating, or simply a necessity to replace an older system no longer working. Then, based on landlord and tenant requirements, we need to establish the most suitable control and programming system. Once all the necessary requirements are met, on receipt of floor plans or property dimensions we will provide you with a comprehensive heating plan and quotation. Throughout this stage we will also be on hand to consult and to provide your estate management, tenant liaison officers and contractors with all the necessary informative and technical literature, as well as advice and guidance.
Preparation before installation of your new heating
One the information required is received, we will provide a bespoke heating requirement calculation plan, advisory literature for your tenants and supply you with full product and installation instructions together with all technical information to ensure that everyone in your organisation involved in the project is fully prepared for the changeover. Should the project require supply only, we do offer an optional package which includes a comprehensive installation training for your contractors, liaise with tenants and associated management, maintenance staff and tenant liaison officers to provide confidence in the installation of our products.
You will be offered full training on how to fully understand the heating system and how to operate it. How to achieve the highest energy efficiency results, as well as troubleshooting any issues you may encounter. Our objective is to provide your organisation with all the necessary expertise to ensure full tenant satisfaction and the confidence to undertake further installations with the necessary knowledge. For peace of mind, many customers do prefer our approved contractors to undertake the installations. The advantage of this option, is the commissioning of the system for which all our contractors are trained for, resulting in extensive knowledge and advice on any systems they install. We believe that our role does not end once the system has been installed, therefore we will liaise with you to evaluate the system’s performance, assist with troubleshooting and to address any issues of concern. Right from the start, to ensure your tenants’ satisfaction, we aim to provide your organisation with trouble free, comfortable, energy efficient heating in line with today’s needs.
In some cases tenants will have become accustomed to their current heating system, therefore, the introduction of a new system needs to be carefully organised to ensure a smooth changeover. This includes ensuring that all tenants, your personnel and contractors have a full understanding of the new system and know what to expect and prepare for prior, during and after the installation.
Room-by-Room Efficiency
Many electric heating systems feature separate heaters in each room, unlike central boilers used in gas or oil heating systems. This setup allows for flexible and efficient heating tailored to individual spaces or zones. Electric radiators are popular types of direct electric heating, and can be more cost-effective when paired with solar energy generation and a battery storage system. Intelli Heat and Renewable, Solar Panels accredited MCS specialists have announced an enhanced collaboration aimed at transforming the landscape of renewable heating technologies. This strategic collaboration is set to offer a comprehensive package designed explicitly for installers retrofitting properties with sustainable, energy-efficient systems, these heaters can efficiently warm individual rooms or supplement your main central heating system.
Efficient Heat Transfer
Electric radiators contain elements that heat up and transfer warmth into the room. The heat is either radiated directly or used to warm the air, which then circulates. The radiator bodies are made from aluminium highly conductive material, ensure efficient heat transfer. ensure efficiency and better heat transfer than steel. The energy efficient performance of our radiators is guaranteed by a combination of thermos efficient design and the latest ACS technologies. This includes each radiator being fitted with an intelligent thermostat which precisely regulates energy consumption by only drawing lesser periodic amounts of energy once a room or zone has reached the set temperature. Another major factor to further reduce running costs is programming and zone control, , now a compulsory aspect of the latest Eco Design Legislations. In order to achieve comfortable, effective and fully controllable low-cost heating, we will make sure your tenants and support personnel fully understand how to achieve the maximum efficiency through programming and controllability.
Modern energy saving Features for Enhanced Control
Since January 2018 ECODESIGN LOT 20, new electric heaters, to be compliant with the new legislations, are required to have certain features, life thermostats, 24-hour and seven-day programmable timers, temperature controls, and open window detection as a minimum. Some models also include smart heating controls for added convenience. Be sure to check for these features, as older models without them can still be sold but would be compliant.
IntelliHeat takes pride in providing top-quality electric heating solutions in the UK, let’s break down what makes our installer service stand out:
Installer Service Peace of Mind:
IntelliHeat’s installer service ensures peace of mind for customers, as a trusted heating solutions provider, we prioritize quality and reliability.
Qualified Installers:
IntelliHeat has a network of approved, fully qualified installers across the UK. They are professionals who have undergone training specific for IntelliHeat’s products, include:
– 1 month free phone consultation
– Help you make decisions about your new smart heating system
– Specify the correct energy efficient range for your property
– Guidance on installation costs
– How to correctly program and use your new smart radiator, zoning
– How to analyses and optimise your entire smart heating installation,
– How to Operate Energy saving features
– iSENSE Heating Management System advice
– Advice on how to use correctly Heating management system
– Advice on how to operate the smart heating more efficiently to save money
Electric Heating Design and Specification: Our installers offer a free design and specification service for your electric heating needs, whether you’re upgrading or installing a new system, their expertise guides the process.
Wi-Fi Electric Heating and Heating Management System: IntelliHeat’s focus extends beyond mere installation, we specialize in supplying wi-fi electric heating and dedicated Heating Management systems. This combination ensures efficient control and energy savings.
Affordability: IntelliHeat’s commitment to value means you’ll receive quality service at competitive prices, if you’re interested in an IntelliHeat-approved installer, feel free to contact us and our team will provide details of the installers covering your area!
